mastrad  logohome








 COATING THICKNESS GAUGE


COATING THICKNESS GAUGE

Ferrous and Non-Ferrous

DEFINITION

The rugged FNF 4-KEY COATING THICNESS GAUGE is very simple to use. The easy to read display and 1% accuracy of the portable makes it the unit of choice for any job site.

The FNF Model in rough surface calibration mode, uses averaging to allow meaningful readings to be taken on irregular surface profiles.

The equipment has auto substrate selection for ferrous or non-ferrous metal. No matter if you are painting, anodizing, or powder coating, this gauge will measure it.

SPECIFICATION

  • Range : 0 -60 mils
  • Resolution : 0.1 mils
  • Accuracy: 3% of the reading
  • Measuring rate: >35 to 40 hrs of continuous use
  • Dimensions: 4.75inch x 2.2inch x 0.95inch
  • Wight: 4oz

  • FEATURES

  • Automatic switch off after 60 seconds to save battery
  • Rough surface calibration, using averaging, giving meaningful readings for irregular surface profiles
  • Units switchable between metric and imperial
  • Model available with or without data output and backlight options

  • Ferrous and non-ferrous, integral probe, range: 0-60 mils Includes: carry case, precision shim set, neck strap, batteries and instructions