• Large display for easy view of density value and concentration as well as messages for easy operation
• Built-in thermal control
• Built-in Viscosity correction
• Easy cleaning and purge drying by the built-in sampling and air pump
• Concentration can be converted from density.
• Multiple sample changer can be connected.
• PC card enlarges memory capacity.
• GLP conformed printout includes the record of check measurement and calibration history.

Applications:
Beverages, foods, petroleum, pharmaceutical, alcoholic beverages, etc.

Range	0 - 3 g/cm3
Accuracy	±0.00002 g/cm3
Temperature	4 - 70°C
Reproducibility	SD:0.000005 g/cm3
Minimum sample	1) manual by syringe: 1.2mL 2) suction by built-in pump: 2mL
Measuring time	1) manual: 1 - 4 minutes 2) programmed: 2 - 10 minutes
Viscosity correction	Built-in
Display	240 X 64 LCD with back light
Contents    of display	Density, relative gravity, frequency, measurement temperature
Interface	1) printer 2) multiple sample changer 3) computer via RS232C
PC card	For memory card and various tables

Multiple Sample Changer

This sample changer can serve both density meter and refractometer. The whole sampling lines from its beginning to the measuring cell or to the flow cell are rinse cleaned and purge dried automatically for continuous sample measurements.

• 30 samples are loaded and continuously measured by pressurized sampling.
• Sequential events can be interrupted by priority measurement.
• Room temperature only.

Number of sample vials	30
Vial size	20mL vial
Sampling method	Pressurized by built-in pump
Ambient condition	5 - 35°C, less than 85%RH