EXISTENT GUMS IN FUELS BY JET EVAPORATION
ASTM D381 - ISO 6246 - IP 131 - DIN 51776- NFM 07004
This test method covers the determination of the existent gums in motor gasoline and aircraft fuels at the time of test.
Provisions are made for the determination of the unwashed gums content of motor gasoline.
Five-unit compact evaporation solid aluminium block bath and steam superheater built into the base.
Exclusive triple digital controller:
For air temperature (155 � 0.5�C)
For steam temperature ( 232 � 2�C)
For both air and steam flows (1000 ml/sec � 15%)
The two temperature controllers are connected to the Pt 100 sensor.
This model, air jet only with 5 wells, includes electronic temperature control and flowmeter, thermometer 3C, beakers, conical outlets. REF. 941303(as above picture)
This model, air and steam jet with 5 wells, includes electronic temperature control and flowmeter, steam superheater, thermometer 3C, beakers, conical outlets.
941308 Steam generator (400V - 3 ph)
941301 Air calibration kit for 941302/941303
941304 Vapour calibration kit for 941303
9413080 Air compressor 2 stages 300 l (400V - 3 ph)
12875 Filter funnel 125 ml
941307 Overpressure pump for steam generator
SPARE PARTS (2 years basis)
941305 Beaker 100 ml
941306 Conical air outlet
9413031 Superheater for 941303 apparatus
9911491 ASTM thermometer 3C
9417900 Pt 100 probe (30x6 mm)
9417904 Pt 100 probe (160x5 mm)
9417834 Pt 100 probe (60x3.15 mm)
9413023 Heating element for metallic bath
997444 Gloves (pair)
The instrument complies with the European Directives regarding operator and Environment safeties and is therefore bearing the CE label.