 
 LOW TEMPERATURE BATH CIRCULATORModel TLC10B
This type of cooling circulator is mostly used for replacing tapwater used for cooling purposes in laboratory equipment or processes. The bath contence is 9 litres
Control mechanism The used cooling system is ozone friendly, so it doesn't contain any CFK/HCFK gas With the compressor running continuously, the fluid temperature is regulated through an electronic controlled heater. Span The TLC10b offers following working range: -45 to +20�C / -49 .. 68�F The setpoint can be set in steps of 0,1�. The overall system accuracy is better than �0,1�K. Standard available in �C, on request in �F. Pump A pressure pump provides circulation in the bath or via an external circuit. The pressure of the pump is 300 mBar at 7,5 ltrs per minute. Safety The bath conforms CE regulation. It is further equiped with a mechanical adjustable and resettable safety thermostat. Optional equipment Technical specifications: Range -45�C..20�C (-49�F..68�F) Reading Standard �C, �F on request Used materials inside bath Stainless Steel 304, PTFE Setting � [�K] 0,1 Stability* � [�K] Better than 0,1 Heating [W] 1500 Heaters 1 Bath volume [L] 9 Pump pressure [mm H2O] 300 Pump cap. L/min 7,5 Compressor Hp 1/3 Heat removal [W] @10�C : 680 [W] @0�C : 560 [W] @-10�C : 480 [W] @-20�C : 380 [W] @-30�C : 265 [W] @-40�C : 170 Opening [mm] 100*150 Depht [mm] 200 x Length [mm] 260 x Width [mm] 550 Hight [mm] 770 x Weight [Kg] 61,5 x Power [W] 2420 All models conform CE regulation See also: Low temperature 3.5 L bath/circulator Low temperature 11 L bath/circulator Low temperature 5.5L bath/circulator Low temperature 5L bath/circulator |