 
"TOTAL STATION GEODOLITE 506B"
THE GEODOLITE TOTAL STATIONS ARE DESIGNED FOR FASTER SIMPLER AND MORE EFFICIENT SURVEYING. BASED ON GEOTRONICS WELL KNOWN TOTAL STATIONS, GEODOLITE SHARES THE SAME HIGH STANDARDS FOR UNSURPASSED PERFORMANCE AND QUALITY.
DESIGNED TO BE EQUALLY AT HOME ON THE CONSTRUCTION SITE OR MAPPING PROJECT, GEODOLITE PROVIDES MAXIMUM EFFICIENCY AT A HIGHLY COMPETITIVE PRICE.
Speed and Accuracy
Distance Measuring speed (0.4 seconds), calculation speed and automatic corrections applied to displayed results make the Geodolite the most accurate and fastest total station in its class.
Ease of Operation
The fully numeric keyboard and large, easy to read display make it a snap to enter data and review results. The Geodolite even prompts you for information so you can't forget critical data.
Choose your program
Geodolite 506B has specila application programs and routines for various measuring tasks. This simplifies and speeds up your work, saving both time and money. At the same time errors are reduced and accuracy is increased as you control the whole process yourself.
Data Collection System.
With Geodolite 506B there's only one keyboard and display screen to operate. All the data is stored in the internal memory with capacity up to 1000 points or in Geodat 500 external memory device with capacity to store up to 3000 points
*Tracklight targeting light enables the
rodman to find the line of sight without
direction from the instrument operator.
(Optional.)
*Wide measuring beam. Speeds up the setting out of
points as locating even a moving target is easy.
*Large, easy-to-read display (4 x 16
characters) with built-in illumination.
* Vertical axis compensator automatically corrects for mislevelment in the sighting direction to ensure
accurate elevations.
*Electronic level display lets you level in both axis
without rotating the instrument. Levelling is faster,
more accurate and not influenced by the sun.
*Distance measurement speed. With distances
determined 2.5 times per second even moving
targets can be tracked and distances displayed in
real-time.
*Industry-standard RS232 data interface for
connection to computers or hand held data
recorders.
*Instantaneous display of horizontal and vertical
distances.
*Countdown-to-zero display of set-out angles and
distances for error free operation.
*Automatic calculation and display of coordinates in
2 or 3 dimensions.
*(Optional): Check distances automatically calculated
and displayed for distance, azimuth, vertical
difference and percent of grade between two points.
*Automatic determination of Remote Object
Elevations (ROE) for checking clearances or
setting out elevations.
*Automatic calculation and display of percent of
grade.
OPTIONAL SOFTWARE LIBRARY
*
Pre-Programmed sequences
for collecting
data/setting out in 2D/3D.
*
Edit - Program
for checking and editing stored data in
the field.
*
StnEst - Program
for three-dimensional
station establishment.
*
SetOut - Program
for three-dimensional setting out
with automatic check of set-out points.
* IZ/Z - Program for instrument height determination
*
DistOb - Program for determining horizontal distance, azimuth
and height difference between two measured points.
*
RefLine - Program
for setting out/collecting detail
along - or parallel with - a reference line.
* AreaCalc Program for calculation of volume and area.
TECHNICAL SPECIFICATION GEODOLITE 506 B
DISTANCE MEASUREMENT
Number of Prisms Standard Clear Measuring Time Standard 3.5 s
Range using 1 1200 m Tracking 0.4s
Geodolite Prism 3 1 800 m
571 126 142 8 2 500 m Light Source Infrared GaAs diode
Shortest Possible 0.2 m (0.7 ft) Beam Divergence 1.6 mrad (16 cm/100 m)
Range
Atmospheric - 60 to 195 ppm continuously
Distance Accuracy Standard Measurement: Correction
(M.S.E) ±(5 mm + 5 ppm) (0.02 ft + 5 ppm)
Fast tracking - max 4 m/s (13 ft/s):
±(10 mm + 5ppm) (0.035 ft + 5 ppm)
Distance Reading Standard Measurement: 1 mm (0.005 ft)
(least count) Fast tracking: 10 nun. (0.01 ft)
ANGLE MEASUREMENT
Angle Accuracy 1.5 mgon = 15cc (5 Angle Reading Standard Measurement:
(DIN 18723)
Standard deviation based on DIN 18723
(least count) 0. 1 mgon = 1 cc (1 ")
Tracking: 0.5 mgon = 5 cc (2")
Number of decimals can be specified by
the user.
GENERAL
Automatic Level Vertical index compensator with Battery Internal rechargeable NiCd battery
Compensator working range of ±100 mgon = 10c (6') 12V, 1,2 Ah.
(Horizontal index compensator available External rechargeable NiCd batteries
as an option) 12V, 2,2Ah, 6,6Ah
Standard Tracking
Levelling Circular level on tribrach 102 mm. Number of meas.1 1,2 Ah Battery 900 points 2 hours
Electronic 2-axis level in the LC-display operating time 2,2 Ah Battery 1800 points 4 hours
with a resolution of 2 mgon = 20cc 6,6 Ah Battery 5400 points 12 hours
*Based on one distance and angle
Centering Optical plumb on tribrach
measurement every 15 sec.
* *Based on continuous contact with the Prism.
Telescope Magnification 30X Aiming Two speed fine adjustment, slow-motion
Coaxial Focusing range 1.7 m - screws
Operating -20'C to +SO'C (-5'T to +122'F) Weight Instrument: 6.2 kg (13.7 lbs)
Temperature -30'C (-22'F) on request Tribrach: 0.9 kg (2 Ibs)
Keyboard/Display 20 numeric keys. 4-row LC Display Internal Battery: 0.3 kg (0.66 Ibs)
with 16 characters/row, illumination Software * Preprogrammed sequences for data
(Optional) collecting/setting out 213131).
Tracklight"2" A blinking guide light with red, white * Edit, * StnEst, * SetOut, * DistOb.
(Optional) and green sectors. The white represents - RefLine, * IZ/Z, * AreaCalc.
the measuring beam.
Internal Memory * Internal Memory, 1000 points
Data Input/Output Geo I/0 Two-way communication (Optional)
RS-232C Two-way communication
External MemoryGeodat 500 (3 000 points),
Power Consumption 0.3A Devices (Optional) or other external data collectors.
Modifications resulting from technical developments may be made in the
|